- SPSS Moderation Regression - Example Data
- SPSS Moderation Regression - Dialogs
- SPSS Moderation Regression - Coefficients Output
- Simple Slopes Analysis I - Fit Lines
- Simple Slopes Analysis II - Coefficients

A sports doctor routinely measures the muscle percentages of his clients. He also asks them how many hours per week they typically spend on training. Our doctor suspects that clients who train more are also more muscled. Furthermore, he thinks that
the *effect* of training on muscularity declines with age.
In multiple regression analysis, this is known as a moderation interaction effect. The figure below illustrates it.

So how to test for such a moderation effect? Well, we usually do so in 3 steps:

- if both predictors are quantitative, we usually mean center them first;
- we then multiply the centered predictors into an interaction predictor variable;
- finally, we enter both mean centered predictors and the interaction predictor into a regression analysis.

## SPSS Moderation Regression - Example Data

These 3 predictors are all present in muscle-percent-males-interaction.sav, part of which is shown below.

We did the mean centering with a simple tool which is downloadable from SPSS Mean Centering and Interaction Tool.

Alternatively, mean centering manually is not too hard either and covered in How to Mean Center Predictors in SPSS?

## SPSS Moderation Regression - Dialogs

Our moderation regression is not different from any other multiple linear regression analysis: we navigate to

and fill out the dialogs as shown below.Clicking syntax. Let's run it.

results in the following***Regression with mean centered predictors and interaction predictor.**

REGRESSION

/MISSING LISTWISE

/STATISTICS COEFF OUTS R ANOVA ZPP

/CRITERIA=PIN(.05) POUT(.10)

/NOORIGIN

/DEPENDENT mperc

/METHOD=ENTER cent_age cent_thours int_1

/SCATTERPLOT=(*ZRESID ,*ZPRED)

/RESIDUALS HISTOGRAM(ZRESID).

## SPSS Moderation Regression - Coefficients Output

**Age** is negatively related to muscle percentage. On average, clients lose 0.072 percentage points per year.

**Training** hours are positively related to muscle percentage: clients tend to gain 0.9 percentage points for each hour they work out per week.

The negative B-coefficient for the **interaction** predictor indicates that the training effect becomes more negative -or less positive- with increasing ages.

Now, for any effect to bear any importance, it must be statistically significant **and** have a reasonable effect size.

At p = 0.000, all 3 effects are highly statistically significant. As effect size measures we could use the semipartial correlations (denoted as “Part”) where

- r = 0.10 indicates a small effect;
- r = 0.30 indicates a medium effect;
- r = 0.50 indicates a large effect.

The training effect is almost large and the age and age by training interaction are almost medium. Regardless of *statistical* significance, I think the interaction may be ignored if its part correlation r < 0.10 or so but that's clearly not the case here. We'll therefore examine the interaction in-depth by means of a simple slopes analysis.

With regard to the **residual plots** (not shown here), note that

- the residual histogram doesn't look entirely normally distributed but -rather- bimodal. This somewhat depends on its bin width and doesn't look too alarming;
- the residual scatterplot doesn't show any signs of heteroscedasticity or curvilinearity. Altogether, these plots don't show clear violations of the regression assumptions.

## Creating Age Groups

Our simple slopes analysis starts with creating age groups. I'll go for tertile groups: the youngest, intermediate and oldest 33.3% of the clients will make up my groups. This is an arbitrary choice: we may just as well create 2, 3, 4 or whatever number of groups. Equal group sizes are not mandatory either and perhaps even somewhat unusual. In any case, the syntax below creates the age tertile groups as a new variable in our data.

***Create age tertile groups.**

rank age

/ntiles(3) into agecat3.

***Label new variable and values.**

variable labels agecat3 'Age Tertile Group'.

value labels agecat3 1 'Youngest Ages' 2 'Intermediary Ages' 3 'Highest Ages'.

***Check descriptive statistics age per age group.**

means age by agecat3

/cells count min max mean stddev.

## Result

Some basic conclusions from this table are that

- our age groups have precisely equal sample sizes of n = 81;
- the group mean ages are unevenly distributed: the difference between young and intermediary -some 6 years- is much smaller than between intermediary and highest -some 13 years;
- the highest age group has a much larger standard deviation than the other 2 groups.

Points 2 and 3 are caused by the skewness in age and argue *against* using tertile groups. However, I think that having equal group sizes easily outweighs both disadvantages.

## Simple Slopes Analysis I - Fit Lines

Let's now visualize the moderation interaction between age and training. We'll start off creating a scatterplot as shown below.

Clicking

results in the syntax below.***Create scatterplot muscle percentage by uncentered training hours by age group.**

GRAPH

/SCATTERPLOT(BIVAR)=thours WITH mperc BY agecat3

/MISSING=LISTWISE

/TITLE='Muscle Percentage by Training Hours by Age Group'.

***After running chart, add separate fit lines manually.**

## Adding Separate Fit Lines to Scatterplot

After creating our scatterplot, we'll edit it by double-clicking it. In the Chart Editor window that opens, we click the icon labeled Add Fit Line at Subgroups

After adding the fit lines, we'll simply close the chart editor. Minor note: scatterplots with (separate) fit lines can be created in one go from the Chart Builder in SPSS version 25+ but we'll cover that some other time.

## Result

Our fit lines nicely explain the nature of our age by training interaction effect:

- the 2 youngest age groups show a steady increase in muscle percentage by training hours;
- for the oldest clients, however, training seems to hardly affect muscle percentage. This is how the effect of training on muscle percentage is
**moderated**by age; - on average, the 3 lines increase. This is the
**main effect**of training; - overall, the fit line for the oldest group is lower than for the other 2 groups. This is our
**main effect**of age.

Again, the similarity between the 2 youngest groups may be due to the skewness in ages: the mean ages for these groups aren't too different but *very* different from the highest age group.

## Simple Slopes Analysis II - Coefficients

After visualizing our interaction effect, let's now test it: we'll run a simple linear regression of training on muscle percentage for our 3 age groups separately. A nice way for doing so in SPSS is by using SPLIT FILE.

The REGRESSION syntax was created from the menu as previously but with (uncentered) training as the only predictor.

***Split file by age group.**

sort cases by agecat3.

split file layered by agecat3.

***Run simple linear regression with uncentered training hours on muscle percentage.**

REGRESSION

/MISSING LISTWISE

/STATISTICS COEFF OUTS R ANOVA ZPP

/CRITERIA=PIN(.05) POUT(.10)

/NOORIGIN

/DEPENDENT mperc

/METHOD=ENTER thours

/SCATTERPLOT=(*ZRESID ,*ZPRED)

/RESIDUALS HISTOGRAM(ZRESID).

***Split file off.**

split file off.

## Result

The coefficients table confirms our previous results:

for the youngest age group, the training effect is statistically significant at p = 0.000. Moreover, its part correlation of r = 0.59 indicates a large effect;

the results for the intermediary age group are roughly similar to the youngest group;

for the highest age group, the part correlation of r = 0.077 is not substantial. We wouldn't take it seriously even if it had been statistically significant -which it isn't at p = 0.49.

Last, the residual histograms (not shown here) don't show anything unusual. The residual scatterplot for the oldest age group looks curvilinear except from some outliers. We should perhaps take a closer look at this analysis but we'll leave that for another day.

Thanks for reading!

## THIS TUTORIAL HAS 7 COMMENTS:

## By Gilberto Cárdenas on August 31st, 2020

Excelente me gusto

## By Herbert Siregar on October 22nd, 2020

Alhamdulillah, nice explanation Sir :)

## By bege on December 23rd, 2021

thats what I exactly was looking for !!!! thank you so much, it will definitely help in my exam tomorrow

## By Charles on September 19th, 2022

can x,lambda moderator variables lead us to spss multiple categories? does it give us information about b variable?.

## By Jon K Peck on November 7th, 2022

It's good to see a discussion of the ease of working with interactions in regression. It's worth notice that this is not limited to two-way interactions. Any number can be used, although more than three-way puts strong demands on the data. And one could test several sets of interactions at one time using the block capability of the regression procedure.

One feature of the procedure often overlooked as it is not provided in the dialog box is /METHOD=TEST ... From the CSR...

TEST (varlist) (varlist). R2 change and its significance for sets of independent variables. This method first adds all variables specified on TEST to the current equation. It then removes in turn each subset from the equation and displays requested statistics.

Another thing to emphasize with interactions is that the effect of a variable can no longer be determined just by its coefficient as the interaction term will also vary with the value of the underlying variable.

When there are interactions the usual identification of the effect of a variable with its regression coefficient holding all other variables constant is not correct. This can all be an issue with nonlinearities. The effect of the variable depends on the data.